Herunterladen Inhalt Inhalt Diese Seite drucken

Fan Mode; A - Operation At Maximum Speed; B - Operation At Auto Speed - Olimpia splendid Bi2 Air TR Hinweise Für Die Verwendung Und Pflege

Gebläsekonvektoren
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 109

3.8 - FAN MODE

When this mode is used, the appliance does not exercise any action on temperature or air humidity in the
room, but only keeps it in circulation.
From board the machine
a. Pressing key "T3" for 2 seconds allows to cyclically select cooling (blue LED), heating (red LED) or fan
(red LED and blue LED off) mode.
b. Under this operating mode, the internal fan is always on and it is possible to select the desired speed of
the fan at any moment by pressing the specific key "T2".
The desired temperature which operates on the automatic speed of the fan can be selected only
from board the machine: the more the desired temperature deviates from ambient temperature,
the more the fan speed is high.
These are the possible speeds for the fan.
MAXIMUM speed
MINIMUM speed
AUTO speed
From remote controller
a. This function can be selected by pressing key "B2" until when the two heating (10) or cooling (11) symbols
are both off.
b. Under this operating mode, the internal fan is always on and it is possible to select the desired speed of
the fan at any moment by pressing the specific key "B6".
In fan mode, the solenoid valve remains disabled, while the fan is activated at the set speed.

3.8.a - Operation at maximum speed

From board the machine
a. To select this mode, press key "
b. With this mode it is possible to obtain the maximum supplied power both in cooling and heating modes
(the fan motor is always activated at maximum speed).
From remote controller
a. To select this mode, press key "B6" several times until the indicator (6) activates completely.

3.8.b - Operation at AUTO speed

From board the machine
a. To select this mode, press key "
b. In this mode, the fan speed adjustment is completely automatic between a minimum and maximum value,
according to the heating or cooling needs of the room
From remote controller
a. To select this mode, press key "B6" several times until the indicator (5) activates.
" (T2) several times until the indicator (A4) activates.
" (T2) several times until the indicator (A3) activates.
EN - 21
Bi2 Air TR

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

B0872

Inhaltsverzeichnis