Herunterladen Inhalt Inhalt Diese Seite drucken

Accessories; Types Of Operation; Betriebsarten; Operation With Incremental Encoder - Ametek dunkermotoren SCA11 PI Serie Betriebsanleitung

Inhaltsverzeichnis

Werbung

5�6 Accessories
Starter Kit
SNR Starter Kit with software 96800 05024
With the „Motion Starter Kit", the user has the possibility
to program the motor quickly and easily.
To program a motor using a PC, a starter kit with CAN
adapter is required. This provides an interface between
the PC and the motor. It must be connected to a USB
port of the PC.
The Starter Kit contains:
-
Software CD „Drive Assistant" see chapter 10
-
miCAN-USB adapter with connecting cable

6 Types of operation

The following types of operation are possible:
- Current/torque mode
- Velocity mode
- Position mode
6�1 Operation with incremental encoder
This function is not available for this motor type.
6�2 Stand-alone operation at stored running

profile

For this type of operation, a pre-defined speed profile
can be stored in memory in the motor. Control of the
motor is through digital inputs and outputs, which are
used, for example, to give the start signal to run the
specified profile.
Version 05.2015 | Page/ Seite 11
5�6 Zubehör
Starter Kit
SNR Starterkit mit Software 96800 05024
Das „Starter Kit" bietet dem Anwender die Möglichkeit
einer schnellen und einfachen Programmierung des
Motors. Um einen Motor mit einem PC anzusteuern, be-
nötigt man ein Starterkit mit CAN Adapter. Dieser stellt
das Interface vom PC zum Motor dar. Er wird an den
USB-Port des PCs angeschlossen.
Das Starter Kit enthält:
-
Software CD „Drive Assistant" siehe Kapitel 10
-
miCAN-USB Adapter mit Verbindungskabel

6 Betriebsarten

Unter anderem sind folgende Betriebsarten möglich:
- Current mode
- Velocity mode
- Position mode
6�1 Betrieb mit Inkrementalgeber
Diese Funktion ist bei diesem Antrieb nicht vor-
handen.
6�2 Stand-alone Betrieb mit gespeichertem

Fahrprofil

Für diese Betriebsart kann ein vordefiniertes
Drehzahlprofil im Motor abgespeichert werden.
Die Ansteuerung des Motors erfolgt dabei über
digitale Ein- und Ausgänge, womit dann z. B. das
Startsignal zum Abfahren des Fahrprofils gegeben
wird.
www.dunkermotoren.com

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

140711

Inhaltsverzeichnis