Maintenance And Do-It-Yourself; Preventive Maintenance; Where To Get Service; Cleaning The Working Chamber - Ivoclar digital PrograMill Dry Bedienungsanleitung

PrograMill Dry – Maintenance and do-it-yourself
8 Maintenance and do-it-
yourself
Some day-to-day basic maintenance and preventive
maintenance is essential to keep the machine me-
chanics and electric components in good condition for
proper machining results.
It is your responsibility to make sure that preventive
maintenance, as well as basic maintenance, is
performed.
You are the only one who can ensure that your
machine receives the proper maintenance care. You
are a vital link in the maintenance chain.

Preventive maintenance

Preventive maintenance for this machine has to be
scheduled yearly or after 2,000 operating hours at the
latest.
To schedule preventive maintenance, contact your
service partner.

Where to get service?

Your service partner is your main contact for all service
related questions. They will provide you with spare
parts, maintenance tips and they will perform
preventive maintenance for you on request.
When your machine is delivered or installed, ask
the service technician for contact details for the ser-
vice partner. We also recommend scheduling the
first preventive maintenance appointment at this
point to ensure your machine gets proper main-
tenance.

Cleaning the working chamber

Cleaning the working chamber includes the following
components:
Measuring key
n
Material holder
n
View window
n
NOTICE
Damaging of the linear guides or the spindle when
cleaning with compressed air
If you clean the working chamber with compressed air,
material chips can reach the linear guides or the
spindle bearings.
Never clean the working chamber with com-
pressed air.
Breathing difficulties caused by processing dust
Processing dust that gets into your lungs can cause
breathing difficulties.
Operating Instructions: PrograMill Dry
Version: 2/19/2021
CAUTION
Clean the machine only if the air extraction system
is properly installed and activated.
Wear a face mask of class FFP2 during the
entire cleaning
We recommend cleaning the working chamber
after all other required maintenance tasks.
1. Have ready:
A dry cloth
n
A vacuum cleaner
n
A wet brush for the measuring key
n
2. Close the working chamber door.
3. Move the spindle to the cleaning posi-
tion by selecting the depicted icon in the
Machining view in PrograMill CNC.
4. Open the working chamber door.
5. Suck up the coarse dirt in the working chamber
with the vacuum cleaner.
6. Clean all surfaces and cracks in the working
chamber thoroughly with the dry cloth. Use a mild
cleaning agent if necessary.
7. Clean the measuring key with the wet brush:
a. Clean every opening of the protective cage
(marked orange) with the wet brush.
b. Clean the measuring key from all sides with
the wet brush, reaching into the openings of
the protective cage.
c. Clean the protective cage with a cloth.
F . 26 – M
IG EASURING KEY
(
PROTECTIVE CAGE MARKED ORANGE
EN 29
( )
MARKED BLUE WITH
)