Overheating Protection; Cleaning And Care; Cleaning The Pouring Tap - Silvercrest SEAD 1800 A1 Bedienungsanleitung

Overheating protection

This appliance is fitted with an overheating protector.
Overheating may occur if there is too little or no liquid in the preserving boiler. In
this case, signal tones sound and the symbol " " blinks in the display. In this
case, immediately pour some liquid into the appliance.
If no liquid is added, the appliance switches itself off after 5 minutes. Once you
have topped it up with liquid you can restart the appliance.

Cleaning and Care

WARNING! RISK OF INJURY!
► Before cleaning, ALWAYS remove the plug from the mains power socket!
Otherwise, there is the risk of receiving an electric shock!
► Let the appliance cool down before cleaning it. Risk of Burns!
WARNING! PROPERTY DAMAGE!
NEVER submerse the appliance in water or other liquids!
The appliance could be irreparably damaged!
► The appliance must not be cleaned using a water jet.
► Do not use abrasive or aggressive cleaning materials. These could attack
the upper surfaces and irreparably damage the appliance.
■ Clean the appliance with a lightly moist cloth. For stubborn soiling use a mild
detergent on the cloth.
■ Clean the display with a soft, lint-free cloth.
Clean the preserving grill 4 in a mild soapy solution and rinse it well with
■
clear water.

Cleaning the pouring tap

To clean the tap 0 thoroughly, you can unscrew the tap lever q. The tap 0
cannot be unscrewed as this could lead to problems with the seal.
1) Screw the tap lever q anticlockwise off the tap 0.
2) Place the pouring lever q in a mild soapy solution and swirl it back and forth.
3) Rinse it off with clear water.
│ GB │ IE
■ 14 SEAD 1800 A1