Water Level Check; Automatic Final Cabin Drying Program; Default Settings - Sentiotec Sawo CK31 Montageanweisung, Gebrauchsanweisung

10 Checking the water level
The control features an automatic water level check
in climate operation.
A recurrent beep and FILL indicated in display 6
will signal that the steam generator (vaporizer) is empty.
At the same time the steam generator (vaporizer) will
turn off automatically.
Refill with water.
The message FILL disappears a little later.
NOTE
The steam generator (vaporizer), however, has to be
equipped with the required signal output. Operation
without this function is also possible.
11 Automatic final cabin drying
program
The final cabin drying program will start automatical-
ly as soon as climate operation has finished, and the
cabin will be dried.
NOTE - We recommend observing the cabin
manufacturer's information provided concerning
the final cabin drying process.
The final cabin drying process should not be can-
celed prematurely since this could result in ca-
bin damage (e.g. mildew and rot).
The final drying program starts automatically once
climate operation is finished.
The final drying process can take up to 85 minutes; the
cabin temperature is controlled and the fan will run at
different speeds. Once the final drying program is fi-
nished, the display 5 turns off.
Operating instructions for the user 9

12 Default settings

Factory-set default settings have already been pro-
grammed in the control you received.
Please refer to the following table for the default set-
tings of specific functions:
Sauna operation:
Start of heating
Heating duration
Temperature
Fan
Climate operation:
Start of heating
Heating duration
Temperature
Fan
Climate
OFF no setting
6 hours
90° C
60 P
OFF no setting
6 hours
50° C
60 P
50 H
53