Information About This Manual; Hazard Information - eQ-3 HomeMatic HM-ES-PMSw1-Pl-DN-R5 Bedienungsanleitung

Information about this manual

1 Information about this manual
Please read this manual carefully before beginning operation with your
HomeMatic components. Keep the manual so you can refer to it at a
later date if you need to. If you hand over the device to other persons
for use, please hand over the operating manual as well.
Symbols used:
Attention! This indicates a hazard.
Note. This section contains important additional information.
Note. This section contains additional important information
about using the device in connection with the HomeMatic
Central Control Unit.
2

Hazard information

We do not assume any liability for damage to property or
personal injury caused by improper use or the failure to
observe the hazard information. In such cases any claim under
warranty is extinguished! For consequential damages, we
assume no liability!
Do not open the device. It does not contain any parts that can
be maintained by the user. There is a risk of electric shock if
the device is opened. In the event of an error, have the device
checked by an expert.
Do not use the device if there are signs of damage to the
housing, control elements or connecting sockets, for example,
or if it demonstrates a malfunction. If you have any doubts,
have the device checked by an expert or by our service
department.
24
For safety and licensing reasons (CE), unauthorized change
and/or modification of the product is not permitted.
The device may only be operated indoors and must be
protected from the effects of moisture, vibrations, solar or other
methods of heat radiation, cold and mechanical loads.
The device is not a toy; do not allow children to play with it. Do
not leave packaging material lying around, plastic films/bags,
pieces of polystyrene etc., can be dangerous in the hands of a
child.
Please take the technical data (in particular the maximum
permissible switching capacity of the relay and the type of load
to be connected) into account before connecting a load! All
load data relates to resistive loads! Do not exceed the capacity
specified for the device. Exceeding this capacity could lead to
the destruction of the device, to a fire or to an electrical
accident.
The device may only be connected to an easily accessible
power socket outlet. In case of danger, disconnect the device
from the power socket outlet.
Only use the HomeMatic Switch Actuator with properly installed
wall outlets with earth contacts and not with multiple socket
outlets or extension cables.
Do not connect devices into the HomeMatic Switch Actuator
which could cause fire or other types of damage in unattended
operation (e.g. irons).
Remove the plug of the connected device from the HomeMatic
Switch Actuator, whenever you make changes or modifications
to the device (e.g. replacing light bulbs).
Hazard information
25