Installing The Sd Card - Spektrum DX18QQ QUIQUE SOMENZINI SPECIAL EDITION Bedienungsanleitung

Downloaded from www.Manualslib.com

Installing the SD Card

The included SD Card enables you to:
• Import (copy) models from another
DX18QQ transmitter
• Export (transfer) models to another
DX18QQ transmitter
• Update AirWare™ software in the
transmitter
To install the SD Card:
1. Power off the transmitter.
2. Remove the battery door.
3. Press the SD Card into the card
slot with the card label
facing upward.
4. Install the battery door.
Exporting the Transmitter Serial Number to the SD Card
Exporting the transmitter serial number to the SD Card allows you to
copy and paste the serial number into the registration screen at
community.spektrumrc.com.
To export the serial number:
1. Press and hold the scroll wheel while powering the
transmitter on until the System Setup list appears.
2. Scroll to the System Settings menu. Press the scroll wheel once
to open the menu.
3. Select NEXT on the System Settings and Extra Settings screens.
4. When the Serial Number screen appears, select EXPORT.
5. Power off the transmitter and remove the SD Card from the transmitter.
6. Insert the SD Card in your computer and open the .txt fi le on the card.
7. Copy and Paste the serial number into the Registration screen on the
Spektrum Community site (community.spektrumrc.com).
www.spektrumrc.com
manuals search engine
SD Card
EN
19