Sony SJ700-015 Handbuch Seite 2

[ For EU and EFTA countries ]
CE Notice
Marking by the symbol CE indicates compliance with the
EMC directive of the European Community. This marking
shows conformity to the following technical standards.
EN 55011 Group 1 Class A / 98 :
"Limits and methods of measurement of radio disturbance
characteristics of industrial, scientific and medical (ISM) radio-
frequency equipment"
EN 61000-6-2 / 99 :
"Electromagnetic compatibility (EMC) - Part 6-2 : Generic
standards - Immunity for industrial environments"
For DC power-driven products to meet EN 61000-6-2 / 99, the fol-
lowing operational conditions must be satisfied.
1. Input and output signal cable length
2. Cable length for input power source
3. Scale cable length
Note
When using the same cable for output signal and input power
source, the cable must not be longer than 10 m.
For AC power-driven products to meet EN 61000-6-2 / 99, the fol-
lowing operational conditions must be satisfied.
1. Input and output signal cable length
2. Scale cable length
警告
本装置を機械指令 (EN 60204-1) の適合を受ける機器にご使
用の場合は、その規格に適合するように方策を講じてか
ら、ご使用ください。
Warning
When using this device with equipment governed by
Machine Directives EN 60204-1, measures should be taken
to ensure conformance with those directives.
Warnung
Wenn dieses Gerät mit Ausrüstungsteilen verwendet wird,
die von den Maschinenrichtlinien EN 60204-1 geregelt
werden, müssen Maßnahmen ergriffen werden, um eine
Übereinstimmung mit diesen Normen zu gewährleisten.
[For the customers in U. S. A.]
WARNING
: 30 m or less
: 10 m or less
This equipment has been tested and found to comply with
: 30 m or less
the limits for a Class A digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when
the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful
: 30 m or less
interference to radio communications. Operation of this
: 30 m or less
equipment in a residential area is likely to cause harmful
interference in which case the user will be required to
correct the interference at his own expense.
You are cautioned that any changes or modifications not
expressly approved in this manual could void your authority
to operate this equipment.