Sony SJ700-015 Handbuch Seite 15

1
Slider
This holds the detection head. When shipped, it is
secured by the slider holder.
2
Slider center
This indicates the mechanical center of the slider. It
serves as a reference when viewing the relative
position with the measuring length marks.
3
Measuring length marks
These indicate the effective movement range over
which accuracy is assured with respect to the slider
center.
Note
When mounting and using the scale unit, be sure to
operate the unit within this range. Using the scale unit
in excess of the effective movement range may
damage the unit.
4
Slider holder
This secures the scale body and slider, and should be
stored after removal.
5
Model name
This indicates the scale unit model name.
6
Serial No.
This indicates the scale unit serial No.
7
Center foot plate
This is mounted when the measuring length is 1250 mm
or more, and should be secured when mounting the
scale unit.
8
Interface unit
This is inserted into the rear panel of the display unit.
The interface unit contains an internal circuit which is
electrically adjusted to the optimal setting.
5