b) Indicators on LCD display
A
B
TEMP (A)
Indicates that the meter is in temperature
mode
VEL (A)
Indicates that the meter is in wind speed
mode
TYPE KJ (A) Temperature measurement with type K
temperature sensor
A
Display A
Area
Symbol AREA (surface area)
LIGHT (B)
Indicates that the meter is in light
intensity mode
SOUND (B)
Indicates that the meter is in sound level
mode
FLOW (B)
Indicates that the meter is in air flow
mode
B
Display B
FAST
Measure with a time weighting of 0.125
seconds (steeper measuring curve)
SLOW
Measure with a time weighting of 1
second (flatter measuring curve)
dBA dBC
Volume units
LUX / FC
Light intensity units (lux, foot-candle)
SETUP
Indicates that the meter is in settings
mode
HOLD
Data memory symbol
REC
Indicates that the measured values
will be recorded (MIN/MAX/AVG)
MIN MAX AVG
The display shows a maximum,
minimum and average value
OFFSET
Sets the temperature offset.
X10 X100
Multipliers for air flow rate measure-
ments
CMM CFM
(ft3/min; m3/min): Units for air flow
measurements
%RH
Humidity unit
PC
The device is communicating with a
computer (USB port)
in
cm
ft
Area units
2
2
2
m/s, ft/min, km/h,
m/s, ft/min, km/h, mph, knots: Wind
mph, knots
speed units
°C °F
Temperature units (°Celsius,
°Fahrenheit)
Battery status symbol (battery level
indicator)
Automatic power-off symbol
(enabled)
33