About Climate Categories; Setting Up And Aligning The Appliance - hanseatic HGS17260ENFI Gebrauchsanleitung

– If you would like to reduce these distances,
you can fit an insulation plate between the
appliances.
– If underfloor heating is installed at the set-
up location, place the cooling appliance on
an insulation plate made from solid mate-
rial.

About climate categories

• Always ensure the prescribed ambient
temperature is maintained (see "Intended
use" on page EN-4).
Climate category means that the appliance
is intended for operation at the ambient tem-
perature specified below (see table 'Climate
categories'). If the room temperature drops
significantly below this, the unit will not switch
on as often. This indicates that an unwelcome
increase in temperature may occur.
'Climate categories' table
Zone description
Extended temperate zone
Temperate zone
Subtropical zone
Tropical zone
Setting up and aligning the
appliance
Risk of damage!
Insuffi cient air circulation may lead to
overheating and cause damage to the
appliance.
The entire space above the appliance
■
must remain clear.
The appliance should not stand di-
■
rectly against the wall (leave a mini-
mum clearance of 5 cm).
1. Place the appliance on as flat and as firm
a base as possible.
2. Check the position with a spirit level.
Code Definition
This refrigerator is designed for use at ambient tempera-
SN
tures of +10 °C to +32 °C.
This refrigerator is designed for use at ambient tempera-
N
tures of +16 °C to +32 °C.
This refrigerator is designed for use at ambient tempera-
ST
tures of +16 °C to +38 °C.
This refrigerator is designed for use at ambient tempera-
T
tures of +16 °C to +43 °C.
Start-up
NOTICE
Page EN-25