Serial Port - Mettler Toledo IND310drive Installationsanleitung

COM1
COM2
Pin 1

Serial Port

The IND310drive terminal's printer port supplies RS 232/20 mA CL and RS 485/422
See the setup
serial interfaces for both input and output of serial data in either demand or
section of the
continuous format output. Either or both of the ports can be configured for demand
Technical Manual
mode or continuous mode output. Information concerning serial data format can be
for information
found in the setup section of the IND310drive User Manual. The maximum
about specific
recommended cable length for RS 232 communications is 15.24 meters (50 feet).
serial data
Table 2-3 and Table 2-4 provide printer port interconnect information.
Figure 2-10: Main Board Connection Locations
Table 2-3: Com 1 (Port on Main Board)
J12 Pin
Number
1
2
3
4
5
6
IND310drive Installation Manual
Pin 1
Ethernet
PS/2
USB
Pin 1
IND310drive Signal
Description J12
TxD1 (RS 232C)
RxD1 (RS 232C)
GND
CLTX+ 20 mA
CLTX– 20 mA
+12 V
2-7