Operation
Setting the temperature
CAUTION
Health hazard!
The appliance may not operate properly if the
ambient temperature exceeds or falls below the
specified temperature range for a prolonged peri-
od. This can then lead to an increase in tempera-
ture inside the appliance.
• Always ensure the prescribed ambient temper-
ature is maintained (see „Intended use", page
EN-4).
The temperature is set using the temperature controller. The cool-
ing power is continuously adjustable from 'MIN' to 'MAX' (lowest
temperature).
First select a medium setting. The ideal storage temperature is
–18 °C. Select a higher setting if the ambient temperature increas-
es (e.g. in summer).
If you set a lower temperature, you will need higher
cooling performance. This increases the energy con-
sumption.
Freezer drawers
If there is not enough space for your frozen goods in the freezer
drawers, you can remove the freezer drawers and store the frozen
goods directly on the cold plates.
1. Pull the freezer drawer out until it stops.
2. Lift the front of the freezer drawer slightly and then pull it out
completely.
Switch off/shutdown
Switch off your appliance if you do not plan to use it for an extend-
ed period of time.
3. Pull out the mains plug to switch off the freezer. Attention! The
freezer cannot be switched off using the temperature control-
ler.
4. Empty the freezer, let it defrost and clean it. (see chapter 'Care
and maintenance')
5. Leave the door open slightly to avoid mould formation in the
interior.
HGS14355EW, HGS14355ES
HGS14355EW, HGS14355ES
Operation
Operation
EN-15
EN-15