Setting The Recording Timer - JVC BoomBlaster RV-NB100B Bedienungsanleitung

Setting the recording timer

You can set the recording timer for DAB/FM
stations or an external device.
By setting the recording timer, the System turns on
automatically one minute before the recording
timer starts.
NOTE
Set the clock before setting the recording timer.
0
(p. 12)
Check the reception of the DAB/FM station and
0
the connection of the external device before
setting the recording timer.
Preset the desired DAB/FM station before
0
setting the recording timer. (p. 25)
Connect the USB device to the unit before
0
setting the recording timer.
The recording timer does not work when the
0
power is supplied through the batteries. Supply
the power through an AC outlet.
1
Press [CLOCK/TIMER].
2
Press [UP] or [DOWN] repeatedly until
"REC TMR" appears.
REC TMR
3
Press [SET].
4
Press [UP] or [DOWN] repeatedly until
"REC SET" appears.
5
Press [SET].
ON 0:00
6
Press [UP] or [DOWN] to adjust the "hour"
of the starting time.
When you press and hold the button, the
0
hour digit changes continuously.
When you press and hold the
0
[UP] or [DOWN] button, the digit changes
continuously.
7
Press [SET].
8
Press [UP] or [DOWN] to adjust the
"minute" of the starting time, the "hour"
and "minute " of the ending time, and
select the source and the volume.
Select "FM" or "AUDIO IN" as the source.
0
When DAB/FM tuner is selected as the
0
source, select a preset number using [UP]
or [DOWN] and then press [SET].
9
Press [SET].
After setting up the volume, "REC SET" is
displayed, followed by the settings in order.
10
Press [D] to turn off the System.
The System turns on automatically and
0
starts recording about one minute before
the starting time of the recording timer.
The "REC" indicator lights while recording.
0
The recording timer works only when the
0
System is turned off.
While the timer is set, the timer indicator
0
[C] lights up.
While the timer is working, [C] flashes.
0
The recording timer works only once.
0
(However, the settings are stored on the
System.)
You cannot set the same time for the
0
starting time and finish time.
NOTE
To go back to the previous step, press
0
[CANCEL].
The [CLOCK/TIMER] and [SLEEP] buttons are
0
disabled while the recording timer is functioning.
37