FM
Listening to FM stations
1
Press [TUNER] repeatedly to select "FM".
Remote control
FM
2
Select the station.
Press and hold [J] or [I] to
change the frequency continuously until a
station of sufficient signal strength is tuned in.
To stop the search manually, press the
0
buttons again.
Pressing the button repeatedly changes
0
the reception frequency in steps of 50 kHz.
Adjusting the antenna
Adjust the DAB/FM telescopic antenna's length,
angle and direction until the best reception is
obtained.
To improve the FM reception
When an FM stereo (FM) broadcast is hard to
receive or noisy, select the monaural reception
(MONO) mode.
Press [FM MODE].
Each time you press the button, the setting
changes.
"AUTO"
: Stereo auto reception
"MONO"
: Monaural reception
NOTE
Monaural reception improves the reception but
0
the stereo effect is lost.
Main unit
(Press repeatedly)
8750
MHz
Presetting stations
You can preset up to 30 FM stations manually.
1
Tune in to a station you want to preset.
2
Press [SET].
FM P-01
Perform the following steps while the
0
indication flashes.
3
Press [UP] or [DOWN] to select the preset
number you want to store.
To cancel the presetting, press [CANCEL].
0
4
Press [SET].
To tune in to a preset station
Each time you press the button, you can select a
preset station.
You can select the preset station directly using
0
the number buttons.
Examples:
To select number 5, press 5.
0
To select number 15, press +10 then 5.
0
To select number 20, press +10 then 10.
0
25