Maintenance; Removing The Built-In Rechargeable Battery; Specifications - Panasonic EW‑DL40 Bedienungsanleitung

► If the identification ring comes off
Put the identification ring back on.
•
Do not forcibly pull the identification ring
since it can break easily.
•
Using the toothbrush without the
identification ring has no effect on its
performance. The ring is simply for user
identification purposes.
After use

Maintenance

►
Charger
1. Pull the charger cover while
pressing the charger cover release
button.
. Wipe off any dirt on the charger and
the charger cover using a soft cloth.
3. Wipe the prongs of the plug with a
dry cloth about once every 6
months.
EW-DL40_EU.indb 7
Removing the built-in rechargeable battery
Remove the built‑in rechargeable battery before disposing of
the toothbrush. Please make sure that the battery is disposed
of at an officially designated location if there is one. Do not
dismantle or replace the battery so that you can use the
toothbrush again. This could cause a fire or an electric shock.
Replace it at an authorized service center.
•
Perform steps 1 to 5 and lift the battery, and then remove
it.


For environmental protection and recycling of materials
This toothbrush contains a Lithium‑ion battery.
Please make sure that the battery is disposed of at an
officially assigned location, if there is one in your country.

Specifications

Related voltage:
See the name plate on the product.
(Automatic voltage conversion)
Battery: 1 Lithium‑ion battery (3.6 V DC; 530 mAh)
Charging time: 1 hours
Input current: 36 mA
Power consumption:  W (when fully charged)




2009/07/28 20:30:04