Corghi A 2030 Betriebsanleitung Seite 51

Air leak from the table top cock.
➔ Renew table top cylinder.
➔ Renew swivel connector.
Bead breaker cylinder lacks force,
fails to break beads and leaks air
Silencer plugged.
➔ Renew silencer.
Cylinder seals worn.
➔ Renew seals.
➔ Renew bead breaker cylinder.
Bead breaker cylinder leaks air around the rod
Air seal worn.
➔ Renew seals.
➔ Renew bead breaker cylinder.
Table top will not rotate in either direction
Inverter faulty.
➔ Replace inverter.
Belt broken.
➔ Renew belt.
Gear unit broken.
➔ Renew gear unit.
Gear unit noisy. The table top makes 1/3 of a revolution
and then stops
Gear unit seizing.
➔ Renew gear unit.
Table top fails to clamp wheels
Table top does not clamp rim.
GB
➔ Renew table top cylinder.
Clamp grippers are worn.
➔ Renew clamp grippers.
Table top mounts or demounts tyres with difficulty
Insufficient belt tension.
➔ Adjust belt tension (fig.23) or renew it.
Vertical slide lifts too little or too far from rim
Clamping plate not adjusted.
➔ Adjust plate.
A 2030 - A 2025 - A 2020 - A 2015 - A 2005 operator's manual 51