2.9
For each drive wheel your electric wheelchair has standard parking brakes.
L L L L
WARNING:
movements – Use the brake only to prevent the wheelchair from unintended
movements.
L L L L
WARNING:
contamination of the tires (water, oil, mud, ...) – Check the condition of the tires
before each use.
L L L L
WARNING:
brakes before each use.
2.10 Transfer in and out the electric wheelchair
L L L L
WARNING:
L L L L
CAUTION:
someone to assist you.
L L L L
CAUTION:
support.
L L L L
CAUTION:
Downloaded from
www.Manualslib.com
Operating the parking brakes
The brakes are not used to slow down the wheelchair during
Good operation of the brakes is influenced by wear and
The brakes are adjustable and can wear – Check the operation of the
Power down the wheelchair before getting in or out the wheelchair.
In case you cannot perform the transfer in a safe manner, ask
Risk of injury – Do not use the joystick, footplates, armrests as
Risk of tipping over of the wheelchair – Do not stand on the footplates.
manuals search engine
To apply the brakes:
1.
Push the brake levers
distinctive click.
L L L L
CAUTION:
Risk of unintended movement –
Make sure the wheelchair is on a flat
horizontal surface before releasing the
brakes. Never release both brakes
simultaneously.
To release the brakes:
1.
Release one brake by pulling the lever
backwards.
2.
Release the second brake by pulling the lever
backwards.
1. Park the electric wheelchair as close as possible to
the place where you want to transfer.
2. Check that the operator unit is switched off. Make
sure that the wheelchair is NOT in freewheel
mode.
3. Fold the footplates upwards to prevent standing on
them.
4. If the transfer is on the side of the wheelchair,
remove the armrest on that side.
5. Transfer to / from the electric wheelchair.
Page 13
Express V
2013-06
forward till you feel a