Checking The Battery Status; Charging Mobile Devices With The Power Bank - Silvercrest SPBL 6000 A1 Bedienungs- Und Sicherheitshinweise

WARNING Do not connect any device to be
charged to power bank as long as the power
bank is charging. Remove the charging cable
from the power bank when it is fully charged.

Checking the battery status

You can check the battery status on the LED display
of power bank anytime.
5
The current battery status is shown on the dis-
play
5
goes out and the user has to lightly press the
ON switch
* This is approx percentage of power bank capacity
but not actual measurement.
Charging mobile devices with
the power bank
Connect the USB cable
charging cable of the device to be charged to
powerbank USB outputs
And then connect micro-USB port of the USB
cable
6
be charged. The charging process will start
automatically.
for about 30 seconds. The display then
to switch the display back on.
2
to the micro-USB input of device to
or the original
6
.
4
GB/IE 33