Troubleshooting - Silvercrest SPBL 6000 A1 Bedienungs- Und Sicherheitshinweise

In case if the charging process does not begin
immediately, press the ON switch
begin the charging process. The current battery
status of the power bank
the charging process by the LED display
To end the charging process, disconnect the USB
charging cable from the mobile device and the
power bank
off and the LED display
approx. 30 seconds.

Troubleshooting

= Problem
= Cause
= Solution
The power bank
It may be that the power bank is not connected
properly.
Check that it is connected.
In order to charge the power bank, a power
supply with 5 V and at least 2 A has to be used.
34 GB/IE
. The power bank will switch
1
5
is not being charged.
1
2
is displayed during
1
will switch off after
lightly to
.
5