Checking The Battery Status - Silvercrest SPBL 8000 A1 Bedienungs- Und Sicherheitshinweise

To charge the power bank
supplies with an output voltage of 5 V and an
output current of at least 2 A.
Connect the USB cable
Input
4
Connect the other end of the USB cable
(USB Type A) to a USB power supply (not in-
cluded in the scope of delivery) (see fig. B).
The current battery status is shown by LED indi-
cator
2
the charging process. When the power bank is
fully charged, all 4 LED lights will be illuminated.
The required charging time for the power bank
depends on the charging source and its output
power. Fully charged this power bank by using
5 V / 2 A charging source approx. 6 hours.
WARNING! Do not connect any device to
be charged to powerbank as long as the Pow-
erbank is charging. Remove the charging cable
from the Powerbank when it is fully charged.

Checking the battery status

You can check the battery status on the LED indica-
tor anytime.
2
of the power bank
and LED light will flash white during
only use power
5
with the Micro USB
6
.
5
GB/IE
6
37