Functional Description; Intended Use; Noise/Vibration Information; Product Features - Bosch GTK 40 Professional Originalbetriebsanleitung

OBJ_BUCH-1038-001.book Page 23 Wednesday, December 9, 2009 1:38 PM
The pneumatic tool may only be connected to lines,
for which the maximal permissible pressure of the
pneumatic tool cannot be exceeded by more than
10 %; for higher pressures, a pressure control valve
(pressure reducer) with preceding pressure-limita-
tion valve in the compressed-air line must be in-
stalled. Excessive pressure leads to abnormal opera-
tion or breakage of the pneumatic tool, which can lead
to injury.

Functional Description

Intended Use

The pneumatic tool is intended for connecting work in
roofing, encasing, battening, manufacturing wall and ceil-
ing elements, wood facades, pallets, wood fences, noise-
reduction walls and boxes.
Only the fasteners (nails, staples, etc.) specified in table
"Technical Data" may be used.

Noise/Vibration Information

Measured noise values determined according
to EN 12549.
Typically the A-weighted noise levels of the pneumatic
tool are: Sound pressure level 96 dB(A); sound power
level 110 dB(A). Uncertainty K=2 dB.
Wear hearing protection!
Overall vibrational values (vector sum of three directions)
determined according to EN 28662 and EN ISO 8662.
Vibrational emission value a
K = 1,5 m/s
Bosch Power Tools
Downloaded from www.Manualslib.com
Read all safety warnings and all instructions.
Failure to follow the warnings and instructions
may result in electric shock, fire and/or serious
injury.
2
<2,5 m/s . Uncertainty
h
2
.
manuals search engine

Product Features

The numbering of the product features refers to the illus-
tration of the pneumatic tool on the graphics page.
1 Workpiece protector
2 Discharge lock-off
3 Depth stop
4 Air outlet with adjustable exhaust cap
5 Handle
6 Air connector
7 Magazine-slider lock (GTK 40)
8 Magazine
9 Selector switch for actuation system
10 Trigger
11 Magazine slider (GTK 40)
12 Clamping lever for opening/closing the shot duct
(GTK 40)
13 Outlet
14 Magazine lock (GSK 50)
15 Refill indicator (GSK 50)
16 Air-connection coupling
17 Supply-air hose
18 Staple strip*
19 Nail strip*
20 Magazine rail (GSK 50)
21 Driver blade
22 Storage for workpiece protector
*Accessories shown or described are not part of the standard de-
livery scope of the product. A complete overview of accessories
can be found in our accessories program.
English | 23
1 609 929 U13 | (9.12.09)