Megasat HD 4 Combo V2 Bedienungsanleitung Seite 45

4. Main menu
LNB settings
Use the t u keys to select the LNB set-
tings and confirm with OK.
Confirm the „Customized" item to access
other settings such as DiSEqC or Unicable.
Confirm the item „Customized" to access
further settings such as DiSEqC or
Unicable.
1
2
3
4
5
6
1. Shows the currently selected satellite.
2. Change the LNB frequency if necessary (default: 9750-10600).
3. If necessary, change the LNB power supply. Select from AUTO, 18 V, 13 V, or OFF.
4. 22 KHz switching (only adjustable with manual LNB setting).
5. Select from NONE, DiSEqC 1.0, DiSEqC 1.1, SCD (Unicable) or SCD2 (Unicable II).
After you have confirmed with OK, you can use the F1 key to make the respective
settings (e.g. the port selection for DiSEqC or the respective frequency for Unicable.
6. Select here how the satellite system is operated (fixed, USALS or DiSEqC 1.2). In case
of a motor control please refer to your motor manual for further settings.
ENGLISH
11