Attaching The Toroidal Ferrite Core To The Power Cord Of The Subwoofer; Looping The Power Cable Around The Toroidal Core - Samsung HW-F450 Bedienungsanleitung

ATTACHING THE TOROIDAL FERRITE CORE TO THE POWER CORD
OF THE SUBWOOFER

Attaching the Toroidal ferrite core to the power cord of the subwoofer

helps prevent RF interference from radio signals.
1. Pull the fixing tab of the Toroidal ferrite core to open it.
2. Make two loops around the core with the power cable of the
subwoofer.
3. Attach the Toroidal ferrite core to the Subwoofer power cord as the figure
shows and press it until it clicks.

LOOPING THE POWER CABLE AROUND THE TOROIDAL CORE

Lift up to release the lock and open the core.
Downloaded from www.Manualslib.com
Close the lock.
manuals search engine
Make two loops around the core with the power
cable. (Start winding 5-10cm (2-4in)
away from the core).
11