Setting Functions - be cool BC11KL2002F Bedienungsanleitung

You can set all functions directly on the unit as well as using the remote control.
Depending on the function set, the indicator lights on the control panel display light up.
Point the remote directly at the front of the unit and make sure there are no obstructions
between the remote and the unit. The remote control has a range of about 7 meters.
SWITCHING THE DEVICE ON
1. Connect the device to a grounded outlet.
2. Push the -button to turn the divice on.
Never switch the air conditioning unit off by pulling the plug. Always use the on/off button to
switch the device off and wait a few minutes before disconnecting it from mains. This allows
the device to perform a cycle of functional checks.
SETTING MODES
Cooling mode
Ideal for cooling the room in hot and humid weather.
1. Push the -button, until the Cooling-Mode indicator
on the display:
2. Select the target temperature with the
32°C/64°F-90°F).
3. Choose a fan speed with the
In the summer we recommend setting a room temperature between 24 and 27 degrees
Celsius. Generally it is not recommended to set a temperature far below the outside
Fan mode
In this mode only the fan is running.
1. Push the -button, until the „
up.
1. Choose a fan speed with the

SETTING FUNCTIONS

NOTE
and
-button.
NOTE
temperature.
"
– indicator on the display lights
-button.
Seite 33 von 48
lights up
buttons (18°C –
Display
Display