HYDAC ELECTRONIC EDS 820 Bedienungsanleitung Seite 23

EDS 820 IO-Link
Standard Variable "Standard Command" index=2 id=V_SystemCommand
data type: 8-bit UInteger
allowed values: 128 = Device Reset, 129 = Application Reset, 130 = Restore Factory Settings, 160 = Reset Primary
Min/Max, 164 = Reset All Min/Max, 165 = Auto-Zero Primary Input, 169 = Store All Input Offsets
access rights: wo
modifies other variables
octet 0
bit offset 7 - 0
element bit 7 - 0
Standard Variable "Device Access Locks" index=12 id=V_DeviceAccessLocks
data type: 16-bit Record (subindex access not
supported)
access rights: rw
subindex bit offset data type
1 0 Boolean
2 1 Boolean
3 2 Boolean
4 3 Boolean
Variable "BDC1 Thresholds" index=60 id=V_Bdc1Thresholds
data type: 32-bit Record (subindex access not supported)
access rights: rw
modifies other variables
excluded from data storage
bit
subindex
offset
1 16 16-bit Integer
2 0 16-bit Integer
SP = switch point RP = switch-back point FL = pressure window lower value FH = pressure window upper value
octet 0
bit offset 31 - 24
subindex 1
element bit 15 - 8
Stand: 21.04.2020
name
Parameter (write)
Access Lock
Data Storage Lock
Local Parameterization
Lock
Local User Interface
Lock
allowed default
data type
values value
See
1250
10.2
See
1750
10.2
1 2
23 - 16 15 - 8
1 2
7 - 0 15 - 8
HYDAC ELECTRONIC GMBH
description
For compatibility reasons only – it is recommended to to
keep subindex 2 „false" in order to avoid any unwanted
system behavior if data storage is set via IO-Link master
Datenhaltung (Subindex 2) ist aus Kompatibilitätsgründen
vorhanden und sollte immer auf „False" stehen, um
unerwartetes Verhalten beim Data Storage zwischen
Master und Gerät zu vermeiden.
mod. other var. name
V_PrimaryValueSp1 Setpoint SP1
V_PrimaryValueSp1 Setpoint SP2
3
7 - 0
2
7 - 0
23
description
Lower limit of RP /
FL in bar
Upper limit of SP /
FH in bar
Mat. Nr.: 669916 D