Porsche 911 GT3 Cup 2007 Handbuch Seite 75

Code gear detection
Gear from gearpoti
Voltage gearpoti
Flag gear det. by poti
CWGANG code for gear detection
by gear poti = 1 oder Button Gear poti must be flashed to reference page by using:
Action/Flashing/Working Page to Reference Page
ugang_w Voltage gear poti, set to 3,85 V in 6. Gear
CAL GEAR calibrates gear potentiometer to 3,85 V
must be flashed to reference page by using:Action/Flashing/Working Page to Reference Page
do basic setting manually, calibration max. +-0,2 V
ZERO GEAR reset offset (ugang_off) to 0
must be flashed to reference page by using:Action/Flashing/Working Page to Reference Page
Detected gear
Det. Gear from ratio
Offset gear poti callib.
corr. volt. gera poti
Threshold ratio1-2
Threshold ratio2-3
Threshold ratio3-4
Threshold ratio4-5
Threshold ratio5-6
70