Charging The Batteries In Parallel - Epropulsion E-Serie Bedienungsanleitung

2.3.4 Charging the Batteries in Parallel

When connected in parallel, the CAN-IN port must be connected to a remote
switch or a communication terminator.
When charging parallel batteries, the charger should connect to a battery
whose CAN-OUT port is not connect with the E battery communication cable
(refer to the 2# battery in figure 2-7).
When charging parallel batteries, the charging time will be longer than charging
one battery. You can choose a charger with greater output power to charge the
parallel batteries to shorten the charging time.
When charging the parallel batteries, the operation is the same as charging the
battery. Please refer to 2.2.3 charging the battery.
1#Battery
Battery Bridging
2#Battery
Remote
Switch
Communication
Terminator
CAN-IN
E battery
Communication Cable
Cable
CAN-IN
Communication
Figure 2-7
MOTOR CAN-OUT
MOTOR CAN-OUT
Cable
Charger
19
Battery Bridging
Cable