Mounting - Lupine Piko R Bedienungsanleitung

More Mounting Options
3M Dual Lock:
Our 3M Dual Lock allows the Piko R to
mount to virtually any helmet.
It is available for the lamphead and the
FastClick-system to put a battery on the
helmet.
Details: www.lupine.de
GoPro mount:
By help of our CNC machined mount, you can put the Piko R on the
standard mount for GoPro. Art. No. 1070
28 Piko R
Mounting Quick Release
For mounting the Piko R on a handlebar different
CNC Quick Release mounts are available.
Have a look at www.lupine.de
For mounting, please first loosen the screws on the helmet
mount/headband. Only one screw but both o-rings are requi-
red for mounting the Piko R on the bar.

Mounting:

1. Put the screw with o-ring through the hole of the handlebar
mount.
2. Put the second black o-ring onto the tip of the screw. The
order of o-ring, screw, o-ring, handlebar mount, lamp must be
strictly adhered to as shown in the picture in order to ensure
flawless functionality.
3. Tighten the screw slightly first, then securely. Cover the open
thread with the included plug.
4. Put the clamp around the handle bar and close it.
Piko R 29