Mounting - Lupine Wilma R Bedienungsanleitung

2

Mounting

Helmet mount:
No tools are required for mounting this lamp. The helmet mount is already mounted to the lighthead.
You can attach this helmet light to almost any kind of helmet with ventilation openings.
Note: The adjustability of the lighthead is defined by the silicone rings at both sides of the lighthead. To
always ensure flawless functionality, both black bolts must be tightened securely.
30 Wilma
First attach the thin velcro with the Lupine
logo to one site of the helmetmount.
Then pull the other end of the velcro through
the ventilation openings available on your
helmet and fix it on the other side of the
helmetmount.
Direct the light into a straight forward positi-
on and tighten the velcro to avoid slipping of
the lighthead during use.
With the provided extension, the battery may
be carried in your jersey or backpack. The
velcro strap also provides the possibility to
mount the battery directly on the helmet.
Headband:
The installation of the lamp on the headbelt
works in the same way by two bolts and
o-rings.
Our headbelt is available in two different
versions. The regular black headbelt ( Art.No.
1043) and our "Heavy Duty" headbelt:
The headbelt hd is the first choice for
orienteering and other fast runners.
Have a look at www.lupine.de (Art. No. 1046)
With the provided extension, the battery
may be carried in your jersey or backpack.
The velcro strap also provides the possibility
to mount the battery directly on the helmet.
2
Wilma 31