INSTALLATION INSTRUCTIONS
Installation instructions
This appliance is installed on the wall.
■
If the extractor hood is to be operated in exhaust-air mode, a
■
flue duct must be fitted.
If the extractor hood is to be operated in air-recirculation
mode, an optional accessory must be fitted. To do this, refer
to the installation instructions provided.The flue duct does not
need to be fitted for air-recirculation mode.
For additional optional accessories, refer to the installation
■
instructions provided.
The surfaces of the appliance are sensitive. Avoid damaging
■
them during installation.
Note: We recommend fitting the appliance such that the lower
edge of the glass screen is in line with the lower edges of the
adjacent wall-hung cabinets. Make sure that the specified
safety clearances from the hob are complied with.
A
B
23