HSM SECURIO AF 300 Betriebsanleitung Seite 14

english
Electrical hazard
Dangerous mains voltage!
Improper handling of the
machine can lead to an electric
shock.
– Check the machine and cable regularly
for damage.
Switch the shredder off if it is
damaged or not working correctly
or before relocating or cleaning it
and disconnect it from the mains.
– Make sure that no water gets into the
shredder. Do not immerse the power
cable or the power plug in water. Never
touch the power plug with wet hands.
– Never pull the plug out of the socket
using the power cable. Always pull out
the plug directly.
14
2 Proper use, warranty
Remove the shredded material container
and check the name plate on the cutting
head (see point 4 Machine components)
to find out which cutting width and mains
voltage your document shredder is
designed for. Refer to the relevant point in
the operating manual.
The shredder is designed for destroying
paper. Depending on the cutting type, it can
also handle small quantities of the following
materials:
Shred width (mm)
Credit and charge cards
CDs
Do not feed this material via the paper
cassette.
Its sturdy drive mechanism is not damaged
by paper clips and staples. The paper in
the autofeed stack must not contain any
staples.
The warranty period for the document
shredder is 3 years. There is a special
warranty for the HSM solid steel cutting
rollers in the document shredder, which is
provided independently of the guarantee,
and remains valid for the entire service life
of the machine (HSM Lifetime Warranty).
This does not apply to document shredders
with cutting widths of 0.78 x 11 mm. This
warranty and guarantee exclude wear and
damage caused by improper handling or
actions taken by third parties. The intake
rollers in the paper cassette are wear parts.
HSM guarantees the delivery of spare parts
for up to 10 years after the production of
this model has been discontinued.
SECURIO AF 300
4.5 x 30 1.9 x 15
● ●
●
02/2018