Ventilation Led; Remote Control - Dometic B1600PLUS Bedienungsanleitung

B1600PLUS, B2200, B2600
7.2
The ventilation LED (fig. 3, page 4) shows the following states:
No.
1
7.3
All settings of the device (e. g. temperature settings, timer programming) are
transmitted to the roof air conditioner by remote control.
The following control and display elements are available on the remote
control (fig. 4, page 4) :
No.
1
2
3
EN
Downloaded from www.Manualslib.com

Ventilation LED

Explanation
Status LED
No light:
Orange light:
Green light:
only B2600: Flashing
green light:
Red light:
Slowly flashing red
light:
Quickly flashing red
light:
Very quickly flashing
red light:

Remote control

Explanation
Digital display:
displays the following:
– Time
– Selected room temperature (target value) in °C or °F
– Actual room temperature
– Air conditioning mode
– Blower level
– Symbols for active additional functions
– Battery status
Button :
Switches the roof air conditioner and remote control on or to stand-by mode
Button :
Selects the blower setting
manuals search engine
The roof air conditioner is switched off.
The roof air conditioner is in stand-by mode.
The roof air conditioning is switched on.
Defrosting/Starting heat pump
Only if the system is connected to 12 Vg: the
supply voltage of 230 Vw is not available.
Malfunction in interior temperature sensor E1
Malfunction in exterior temperature sensor E2
Malfunction in exterior temperature sensor E3
Technical description
39