To activate the lamp's LC display
the insulating strip on the battery compartment
. A melody will then sound.
11
To activate the reflector light, the lamp must first
be charged using the Micro-USB cable. Charge
the lamp by inserting one end of the Micro-USB
cable into the USB port
of the Micro-USB cable into a USB adapter.
Switching the lamp on / off
Switch the lamp on or off using the On / Off
touch button
on the lamp base
3
Dimming the lamp
You can dim the lamp in three stages.
The brightest stage is activated automatically when
you switch on the lamp. By repeatedly pressing the
On / Off touch button
dimmed in 3 stages and switched off again.
Switching the LC display
lighting on / off
Switch the lighting on the LC display
off using the On / Off touch button
the lamp base
. (A quick touch is sufficient.)
4
Functions
Time mode:
Alarm/ snooze
mode:
, remove
1
and the other end
5
.
4
the lamp can be
3
on or
1
on
2
Displays time, date,
week, temperature;
12 / 24 hour format
(AM = morning, PM =
evening)
Set the alarm time and
select alarm signals;
snooze function can
also be operated at the
same time
Birthday reminder
mode:
Timer mode:
Temperature
mode:
Settings
Press the mode button
different functions:
Output format
Note: If no button has been pressed for one minute,
the LC display
returns to the output format.
1
Time mode / 12/24 hour clock
Press the mode button
12/24 hour format.
Press the set button
mat using the up button
Press the set button
your entry. Enter the information in the following
order:
Set-up / Settings
Set the time and date of
a birthday; a song will
play on the selected
day
Set time will be counted
down
Automatic display of the
current temperature: us-
ing the set button
13
you can select either °C
or °F.
to switch between
12
12/ 24 hour format
Alarm mode
Birthday
reminder mode
Timer mode
to configure the
12
to set the desired for-
13
or down button
14
15
once more to confirm
13
GB/IE
.
17