Product Installation - Bosch REXROTH 3 842 558 625 Montageanleitung

7.4

Product installation

Fig. 5: Lifting module installation
Notes on installation:
• Only install the lifting module if it is retracted.
• Check for parallelism.
• Install the free from distortion.
Option for fastening in the 10 mm* profi le slot
– MGE T-bolt (3 842 528 715) + fl ange nut (3 842 345 081)
– MGE sliding block (3 842 528 735 / ... 547 811-VA ESD) + collar screw
(3 842 541 409) or
– MGE sliding block (3 842 528 735 / ... 547 811) + 2x hexagon socket head
cap screw (ISO 4762), 2x washer (ISO 7089-8)
*All screws (M8x20), all nuts and sliding blocks (M8).
M =25 Nm
D
3 842 559 937/2019-07, MPS: Lifting module, Bosch Rexroth AG
Installation 17/28
T40
M = 25 Nm
D
2x
SW6
M = 25 Nm
D
559 937-05