Filters; Electrical Connection For The Uk - Miele S 770 Gebrauchsanweisung

en
Crevice nozzle, 560 mm (SFD 20)
Flexible crevice nozzle for accessing
awkward to reach areas.
Upholstery nozzle, 190 mm (SPD 10)
Extra wide nozzle for cleaning
upholstery, mattresses, car seats etc.
Flexible extension hose (SFS 10)
For extending the suction hose by
approx. 1.5 m.
Hygiene seal with active charcoal
Helps prevent dust and odours
escaping when the suction hose has
been removed from the cleaner.

Filters

Active Air Clean exhaust filter
(SF-AAC 30)
This filter absorbs odours from the dirt
collected in the dustbag.
Active HEPA filter (SF-AH 30)
Excellent filtration level for very clean
exhaust air. This filter is particularly
suitable for allergy sufferers.
Filter grille
The filter grille is required if you wish to
fit an Air Clean filter instead of an Active
Air Clean filter or an Active HEPA filter.
40

Electrical connection for the UK

All electrical work should be carried out
by a suitably qualified and competent
person in strict accordance with current
national and local safety regulations
(BS 7671 in the UK).
The voltage and frequency are given on
the data plate located underneath the
vacuum cleaner. Please ensure that
these match the household mains
supply. The fuse rating is quoted on the
plug.
The appliance is supplied with a cable
and moulded plug ready for connection
to a 230-240 V/50 Hz a.c. single phase
supply.
Non-rewireable plugs BS 1363
The fuse cover must be re-fitted when
changing the fuse, and if the fuse cover
is lost the plug must not be used until a
suitable replacement is obtained. The
colour of the correct replacement cover
is that of the coloured insert in the base
of the plug, or the colour that is
embossed in words on the base of the
plug, (as applicable to the design of
plug fitted).
Replacement fuses should be ASTA
approved to BS1362 and have the
correct rating. Replacement fuses and
fuse covers may be purchased from
your local electrical supplier.