Cause: Temperature alarm
Silencing the alarm sounds
All alarm sounds can be temporarily
deactivated by pressing the Test
Stop button (Fig. 1, item d) (smoke
alarm and temperature alarm:
10 min.).
Indication sounds:
A single tone is issued every 90
seconds (short beep).
90 seconds
Volume:
Cause:
Low battery warning
If the smoke alarm issues one of the two
indication sounds described above, the
device will remain capable of providing
Downloaded from
www.Manualslib.com
10 min
manuals search engine
its warning function for a maximum of
60 days and must therefore be replaced
before this remaining 60-day period
expires.
Indication sounds:
A double tone is issued every 90
seconds (short beeps).
90 seconds
Volume:
Cause: Device is contaminated
Silencing the
indication sounds:
All indication sounds can be tempo-
rarily deactivated by pressing the
Test/Stop button (Fig. 1, item d)
(low battery and contamination
indications: 24 hours).
– 37 –
GB
24 h