LORCH MicorTIG 200 DC ControlPro Bedienungshandbuch Seite 45

Machine configuration
18 Machine configuration
This menu can be used to adjust the
i
machine configuration and query vari-
ous information.
 Call up the secondary parameters by pressing
button 40.
 Call-up the machine configuration menu by
pressing button 40 for 2 sec.
 Set the desired menu point by rotating the con-
trol knob 19.
‰ A description of the menu points is provided in
chapter .
‰ The current value is shown in the bottom line.
 Confirm the menu point by pressing operating
button 19.
 The value is shown in the bottom line in invert-
ed form and can be changed by turning control
knob 19.
‰ Alternatively, a selection list is shown.
 Store the change by pressing control knob 19.
 Pressing button 37 or 40 terminates the change
without saving or terminates a menu level.
Powermaster LED lock
This function is used to lock the "Mode" button
at the i-LTG/i-LTW series torch. Pressing the Mode
button for 2 sec. unlocks this button for 15 sec.
The "Mode" button will immediately be locked
when the start/stop button is pressed during
these 15 sec.
Torch protect
When an i-LTG/i-LTW series torch is used, only
one welding current with max. torch capacity can
be set at the welding unit.
Setting the torch ID
Each torch in the i-LTG/i-LTW has a specific torch
identification number. This torch ID is coupled to
the load capacity of the torch, which is required
for the torch protection function in the TIG oper-
ating mode.
‰ Setting the torch ID is, for example, required
when the torch PC board is exchanged
 Select the Torch point in the configuration
menu.
04.19
 Select the "Set burner ID" menu point.
‰ The currently selected torch ID is shown.
 Select the appropriate ID for the torch accord-
ing to the following table and transfer it to the
torch module by pressing the control knob 19.
Torch ID
Type of torch
i-LTG 900
i-LTG 1700
i-LTG 2600
i-LTG 2800
i-LTW 3000
i-LTW 1800
i-LTW 1800sc
i-LTW 2000
i-LTW 4500
Tab. 4:
909.4169.9-03
Loading capacity
Torch ID
9 125 A
17 150 A
26 200 A
28 300 A
30 320 A
18 350 A
19 400 A
20 220 A
45 450 A
Torch ID
DC AC
80 A
120 A
160 A
250 A
220 A
250 A
320 A
165 A
360 A
- 43 -