Basic Adjustment Settings; Setting Up Tv Channels Automatically; Using Auto Installation; Setting Up Tv Channels Manually - Pioneer PDP-506FDE Bedienungsanleitung

Basic Adjustment Settings

Basic Adjustment Settings

Setting up TV channels automatically

This section describes how to automatically search for and set
up TV channels.

Using Auto Installation

When the Plasma Display System is switched on for the first
time after purchase, the initial auto installation is initiated. You
can automatically set language, country and channels in
successive operations.
1
Select "Language" ( / ).
2
Select a language ( / ).
Auto Installation
Language
Country
Installation
• You can select from among 14 languages; English,
German, French, Italian, Spanish, Dutch, Swedish,
Portuguese, Greek, Finnish, Russian, Turkish,
Norwegian, and Danish.
3
Select "Country" ( / ).
4
Select the country ( / ).
5
Select "Start" ( / then ENTER).
• Auto Installation automatically starts.
• To quit Auto Installation in progress, press RETURN.
NOTE
• You can start Auto Installation from the Home menu after
moving to another country, for example. Perform the
following steps Œ to Ž before starting Auto Installation.
ΠPress HOME MENU.
 Select "Setup" ( / then ENTER).
Ž Select "Auto Installation" ( /
• The password entry screen appears. Enter your 4-digit
password using buttons 0 – 9.
• If no channel is found, check the antenna connections, and
then retry Auto Installation.
English
Austria
Start
then ENTER).

Setting up TV channels manually

This section describes how to set up TV channels manually.

Using Manual Adjust

Use Manual Adjust to set up TV channels manually.
1
Press HOME MENU.
2
Select "Setup" ( / then ENTER).
3
Select "Analogue TV Setup" ( /
• The password entry screen appears. Enter your 4-digit
password using buttons 0 – 9. For the password, see
"Using a password" on page 38.
4
Select "Manual Adjust" ( /
5
Select "Programme Entry" ( / ).
Manual Adjust
Programme Entry
Search
System
Colour System
Store
Tuner NR
Child Lock
Decoder
6
Select a programme number ( / ).
• You can select 1 through 99.
7
Select "Search" ( / ).
8
Enter a frequency using buttons 0 – 9 and ENTER.
• You can also press /
Manual Adjust
Programme Entry
Search
System
then ENTER).
then ENTER).
1
41.75MHz
B/G
Auto
No
On
View
Off
to enter a frequency.
1
41.81MHz
B/G
08
27
En