Tests (taking Germany as an example):
R
The shop owner/operator must ensure that all electrical
systems and equipment are tested by a qualified electri-
cian or under the guidance and supervision of a qualified
electrician to ensure they are in proper working order:
$
prior to commissioning.
$
following modification or repair.
$
at specific maintenance intervals. Intervals are to be
defined in such a way that faults that can be reasona-
bly expected to occur are found in good time.
R
The applicable electrical-engineering principles must be
taken into account in testing.
R
An inspection log with the appropriate information must
be maintained wherever ordered by the trade associati-
on.
2.5
Related documents
All documents for the SCT 415 S52:
Document
CE declaration of conformity:
Greenline laser module
(P-Assist S5)
Greenline laser module
(P-Assist S5) operating inst-
ructions
Robert Bosch GmbH
Part number
1 690 386 037
1 690 386 038
Safety information | SCT 415 S52 | 31
3.
Safety information
3.1
Risk of injury, risk of crushing
During transportation, commissioning and operati-
on, there is a risk of injury and damage from falling
objects.
Safety measures:
¶
Wear safety shoes.
¶
Use protective gear, e.g. gloves.
¶
Secure the vehicle in the front, rear and on the sides
from rolling off the measurement bay.
¶
Do not use any force-amplifying tools.
¶
Always observe the operating instructions regarding
transportation and commissioning.
3.2
Danger from powerful mag-
nets!
The powerful magnets of the SCT 415 S52 are a
potential risk for wearers of pacemakers.
¶
Keep the magnets of the SCT 415 S52 well
away from pacemakers.
!
Do not place any magnetic data storage
devices (e.g. CD/DVD) in the vicinity of
the SCT 415 S52. They could be rendered
inoperable by the powerful magnets of the
SCT 415 S52.
en
|
1 690 386 051
2020-10-22