Care; Checks - SCHUNK LDM Serie Montage- Und Betriebsanleitung

7.13 Care

WARNING
Only carry out work on linear motor drives while the machine is
switched off.
Maintenance of guide and secondary part
1 Guide strips
Weekly maintenance (depending on degree of contamination)
• Rub the guide strips with a cloth soaked in oil (only use
GAS301478 oil).
Every 2 to 4 weeks
• Clean the secondary part (2) with a lint-free cloth.

7.14 Checks

• Regularly check all electrical connections for firm seating.
• Regularly check cable for damage. Shut down the automated
system in the event of defects and replace the cables.
06.00 | LDM | Assembly and Operating Manual | en | GAS360926
Maintenance and repair work
2 Secondary part
125