Tyre Pressure; Tyre And Inner Tube Change - MZ CHARLY Bedienungsanleitung

CHARLY OPERATING INSTRUCTIONS

15.1. Tyre pressure

DANGER!
The internal tyre pressure determines CHARLY's roadworthiness.
Check the tyre pressure on a regular basis, i.e., every 14 days when
the scooter is used frequently.
The specified internal pressure is 300 kPa (3 bars) for both tyres. This air pressure must
be checked from time to time, i.e., approximately every two weeks if the vehicle is used
daily. The air pressure should be adjusted correctly whenever the vehicle is put in the
garage for a longer period of time.
How to inflate the tyres
The valves are located on the right side of the wheels. A tyre pump can be used directly on
the front wheel.
A valve extension (fastened at the battery) must be screwed to the valve on the rear
wheel. The driving wheel has a sufficiently big opening for this purpose. Inflate the tyre,
then unscrew the valve extension and store it in the cable compartment again.

15.2. Tyre and inner tube change

Dismount the corresponding wheel to change the inner tube and/or tyre. To dismount the
wheel, unscrew the axle nuts on both sides, and take out the wheel and the brake
assembly. Tyre and inner tube can be replaced when both wheel half rims are separated.
Reassemble the wheels correctly at the end of the process.
Downloaded from www.Manualslib.com
Axle nut tightening torque: 25
manuals search engine
+5
Nm.
19
ENGLISH