Powering On And Initializing The Aircraft - Reely 2280967 Kurzanleitung

7.5 Powering on and initializing the aircraft

WARNING
Always power on the remote controller before you turn on the aircraft to prevent accidents.
1. Put the aircraft on a flat surface.
2. Power on the remote controller. Hold down the <Power> button for 2 seconds (Fig. A).
3. Power on the aircraft:
- Push the <Power> button once (1x), then hold down the <Power> button for 2 seconds (Fig. B).
- The initializing tune plays.
4. Wait for the self-inspection and frequency matching procedure to complete.
- The procedure takes about 30 seconds.
- When the indicator lights turn from flashing or solid blue to flashing or solid green the procedure is completed
(Fig C).
Fig. A
Fissssssss
Fig. C
Fissssssss
Fig. B
sss
sseeee
29