Flying; Introduction; Taking Off - Reely 2280967 Kurzanleitung

8. Flying

8.1 Introduction

This section assumes you will control the aircraft with the remote controller. The aircraft can also be controlled through
the mobile application (refer to the full operating instructions for details).
Important features:
• You can take off and land manually or by using the one-key program.
• You can select between different flight modes.
• You can use the Return-To-Home function to let the aircraft return to the starting position automatically.

8.2 Taking off

Requirements
Before you take off make sure that:
• the flight battery and the remote controller battery are fully charged.
• the aircraft and remote controller are turned on, linked and the aircraft initialized.
• you understand what the controls do (see section
Remember
• When you turn on the aircraft the Position Flight Mode is activated by default.
9. Flight
- See chapter
• It is highly recommended to only take off after the green light turns solid (strong GPS signal).
• Choose a wide and open flight environment. Tall buildings and metal materials may interfere with the com-
pass and GPS equipment on the aircraft.
8.2.1 Taking off via the one-key program
1. Hold down the <One Key Takeoff/Land> button for 2 to 3 seconds. When the remote controller beeps steadily,
the aircraft will automatically take off and raise to an altitude of 1.2 meters and hover.
2. Control the aircraft with the joysticks.
8.2.2 Taking off manually
1. Start the motors by fully pushing the left and right joysticks
outward into their bottom corners and holding them there for at
least 3 seconds.
2. Use the throttle joystick to take off.
3. Control the aircraft with the joysticks.
modes for information on available flight modes and how to use them.
6. Controls).
31