Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
EN
Installation and Assembly
2 Installation and Assembly
2.1
Environmental Conditions
Storage temperature:
Operating temperature:
Relative humidity
IP degree of protection according to EN 60529
(sensor and cable connection plug)
Shock resistance
2.2
Scope of Supply
Check the packaging for damage upon delivery and make sure that the contents are complete and
undamaged:
•
Sensor AS-247
•
2 screws (M6)
•
2 anti-loss washers (premounted)
•
User manual
2.3
Mounting
Requirements
The acceleration to be measured has to lie in the plane spanned by X and Y. For measuring the tower vib-
ration of a wind energy plant, the measuring plane lies for example perpendicular to gravitational accelera-
tion g
Abbildung 1
For mounting, a free surface of at least 5 cm x 5 cm is necessary. The mounting surface must be flat,
solid and absolutely free from dust, dirt and other foreign matter.
l
18
Y
g
X
Mounting position for tower vibration
-40 °C ... +85 °C
-40 °C ... +85 °C
≤ 100 %
IP66 / IP67
1,000 g in all directions
Werbung
Inhaltsverzeichnis
