Mondolfo Ferro MT 3650 Up Betriebsanleitung Seite 100

"Movable planes" programme (available only with EASY ALU
This function is automatically enabled when an EASY ALU programme is selected.
It modifies the former selected positions for the application of adhesive balancing
weights, in order to allow perfect wheel balancing using commercially available adhesive
weights in multiples of five grams. The accuracy of the machine is thereby improved,
avoiding rounding-off or cutting the weights to be applied to come closer to the actual
unbalance values.
The modified positions, where the adhesive weights are to be applied, are identified
by the user according to the information given by the wheel balancer (see the Balancing
weight application section).
(available on with EASY ALU programme)
This programme divides the outer weight Pe into two weights, P1 and P2, located in any
position chosen by the operator.
The only condition is that the two weights must be within an angle of 120° (including the
weight Pe), as shown in fig. 22.
Figure 22. Conditions necessary for using the Hidden weights programme
The Hidden Weight programme is used on alloy rims, only and exclusively in conjunction
with the EASY ALU 1/EASY ALU 2 programme:
- when the outer weight would rather be hidden behind two spokes for aesthetic
reasons;
To use this programme, proceed as follows:
1. Beforehand, select between one of the programmes, EASY ALU 1, EASY ALU 2 by
selecting the EASY ALU 1 Balancing programme or the EASY ALU 2 Balancing pro-
gramme icon.
The mask for measuring the unbalance on alloy rims is displayed.
2. Perform the wheel balancing with the procedure described in the "EASY ALU 1, EASY
ALU 2 Programme" chapter, without however applying the outer weight.
100
programmes)
"HIDDEN WEIGHTS" PROGRAMME
Operator's Manual MT 3650 Up
22