Initial operation
Initial operation
Inserting batteries into the remote control
Switching the appliance ON and OFF
PRN45HD
Downloaded from
www.Manualslib.com
Open the cover of the battery compartment on the rear of the
remote control .
Place the two AA batteries supplied into the battery compart-
ment, observing the correct polarity .
Replace the cover on the battery compartment again .
NOTE
►
Change the batteries when the range of the remote control
decreases or if the media player no longer reacts to all the com-
mands .
Switching on
After connecting the cable to the DC IN jack and pressing the ON/OFF
button on the front of the appliance, the main menu appears on the
screen and the indicator lamp lights up blue .
NOTE
►
Alternatively you can also press the
ton on the remote control to switch on the appliance .
Switching off
After pressing the ON/OFF button on the front of the appliance, the
appliance switches to standby mode and the indicator lamp lights up
red .
NOTE
►
Alternatively you can also press the
ton on the remote control to switch the appliance to standby
mode .
►
To switch off the appliance completely, pull the mains plug of
the AC adapter out of the plug socket .
manuals search engine
ON/OFF (standby) but-
ON/OFF (standby) but-
g
135