Digital Audio System - Hama PRN45HD Original Bedienungsanleitung

Setup and connection
Connection of a digital audio system
PRN45HD
Downloaded from www.Manualslib.com
Plug the RCA connector (Cinch) of the coaxial cable into
‹
the S/PDIF coaxial jack of the appliance . If you use an opti-
cal waveguide (not included in the scope of supply), plug the
TOSLINK connector of the optical waveguide into the S/PDIF
OPTICAL jack of the appliance .
Connect the other plug of the coaxial cable or the optical
‹
waveguide to your digital audio system .
In this way you obtain a powerful Dolby Digital, DTS or MPEG sound .
Further information on the configuration can be found in chapter
"Changing audio settings" .
NOTE
► The coaxial cable or optical waveguide are not part of the scope
of supply .
manuals search engine
g
133