CAUTION:
Change the digital camera setting when using the underwater wide
conversion lens (PTWC-01).
Press the MENU button, then select "PTWC-01" under "Accessory
EN
Settings" in the "Camera Menu 2". Then press the OK button.
* Even if the setting has been changed, the four corners of the image may be
darkened when the zoom is used.
For details, see the instruction manual of the digital camera.
Open the Case
1 Slide and hold the slide lock towards the arrow direction (1 of figure below)
and turn the open/close dial counter clockwise (2 of figure below).
2 Turn the open/close dial to the position where it cannot be turned further.
3 Open the rear lid of the Case gently.
CAUTION:
Do not exert too much force while turning the open/close dial. Doing so may
damage the dial.
EN 16
1
Slide lock
2
Open
Open/close dial