Full Face Helmet Installation - Sena SRL2 Benutzerhandbuch

SRL2

2.2 Full Face Helmet Installation

To securely install the SRL2 on the full face helmet, please follow this
procedure.
(-) Button
Center Button
(+) Button
Wired Microphone
12
2.2.1 Preparing the helmet for installation
1. Push the tab on the right cover with your thumb.
Speaker
2. While pushing the tab, insert the service tool into the groove and
push to remove the cover.
Bluetooth
Module
3. Repeat the process on the other side to remove the left cover.